Arris Dg3450 Manual Pdf (2024)

FAQs

What is the admin password for DG3450? ›

By default, the Username should be admin, and the Password should be the Pre-Shared Key located on the modem's label to log in.

With your modem still powered on, press and hold the Reset button – found on the back of the modem – for 10 seconds. (You need a pen or paper clip to push it.) Once the online light is solid green, go to the Take Note of Your Wi-Fi Network steps on page 4.

The ARRIS Touchstone DG3450 is a DOCSIS 3.1 home gateway supporting 2×192 MHz OFDM in the downstream and 2x96MHz OFDMA in the upstream along with 32×8 channel bonding for up to 2.5 Gbps of broadband data.

Rebooting an Arris modem is usually enough to resolve any issue with connecting to the Internet. Unplug your modem from the power source, wait for 1-2 minutes, and plug it back in. However, if rebooting doesn't solve the problem, you should check the cables for damage or reset to factory settings.

A default (admin) password is a piece of alphanumerical text for the user to log in to a service for the first time. Common default passwords include “admin” and “guest”. Default login credentials can be found in user manuals. Many websites share lists of default login info as well.

To reset your Windows 10 admin password, select Forgot Password? on your Windows 10 device's sign-in screen. Or, go to the Start menu > Settings > Accounts > Your Info > Manage my Microsoft Account. Select More Options > Edit Profile > Change Your Password.

The factory reset will disassociate the gateway from the SURFboard Central app and erase all settings. It is recommended to use the SURFboard Central App to configure the SBG7600AC2 home network quickly and easily. For assistance with setup, refer to article # 18840 - SURFboard Central: Wi-Fi Cable Modem Setup.

By default, the username is admin, and the password is password. For network security purposes, ARRIS recommends changing the router default admin user name and password after logging onto the SBR-AC1200P for the first time.

While some people use the two words interchangeably, they are not the same thing. A modem brings internet service into the home from internet service providers (ISPs), while a router delivers that internet connection to the devices in your home, allowing them to connect wirelessly via WiFi or through Ethernet cables.

The NVG468MQ Gateway provides a MoCA 2.0 LAN interface to connect with Set-tops and other MoCA compatible devices at speeds up to 600Mbps.

How do I know if my Arris modem is bad? ›

Solid green LED: Indicates a data transfer rate of one gigabit per second. Blinking green LED: Indicates data traffic is in progress. Solid amber LED: Indicates a data transfer rate of less than one gigabit per second. Blinking amber LED: Indicates data traffic is in progress.

Common signs of a faulty internet router include slow connection, frequent drops, unresponsiveness, overheating issues, weak Wi-Fi signals, and outdated firmware.

When you unbox your Cisco switch or router and turn it on, the first setup of the device requires login through the console. The default username and password are both “cisco” or “admin” with default IP addresses of 192.168. 1.1 or 192.168. 1.254.

Visit http://localhost:3000/admin and log in as the default user: User: admin@example.com. Password: password.

When performing a hard reset or factory-default reset: The base station is set to request an IP address by DHCP. The base station password is set to "public." The base station name is set to "base station," followed by the last six digits of the base station's MAC (Media Access Control) address.

When trying to access the Intel Bios Setup Utility, the computer will prompt for a default password. This default password is openly available to gain access to and change your Intel Bios settings. This default password is “Admin password” or “Supervisor password”.